search for: eui64

...gt; >>>> ipv6.ip6-privacy: -1 (unknown) >>>> ipv6.addr-gen-mode: stable-privacy >>>> >>> >>> >>> Okay so from the man page: >>> >>> The permitted values are: >>> "eui64", or >>> "stable-privacy". If >>> the property is set to >>> "eui64", the addresses >>> will be generated using >>> the interface tokens >>> derived from hardware >>> address. This makes the >>> host p...

...> https://lists.centos.org/mailman/listinfo/centos >>> >> >> ipv6.ip6-privacy: -1 (unknown) >> ipv6.addr-gen-mode: stable-privacy >> > > > Okay so from the man page: > > The permitted values are: > "eui64", or > "stable-privacy". If > the property is set to > "eui64", the addresses > will be generated using > the interface tokens > derived from hardware > address. This makes the > host part of the > address to stay > constant, making it > po...

...ical Linux bridges (brctl), things work fine. They don't when I try macvlan: On the host: 4: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0d:b9:34:2a:fe brd ff:ff:ff:ff:ff:ff promiscuity 1 addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 5: unt382@enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether 00:0d:b9:34:2a:fe brd ff:ff:ff:ff:ff:ff promiscuity 0 vlan protocol 802.1Q id 382 &lt...

...fo/centos >>>> >>> >>> ipv6.ip6-privacy: -1 (unknown) >>> ipv6.addr-gen-mode: stable-privacy >>> >> >> >> Okay so from the man page: >> >> The permitted values are: >> "eui64", or >> "stable-privacy". If >> the property is set to >> "eui64", the addresses >> will be generated using >> the interface tokens >> derived from hardware >> address. This makes the >> host part of the >> address to s...

...host bridge? > > They don't when I try macvlan: > > On the host: > 4: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 > link/ether 00:0d:b9:34:2a:fe brd ff:ff:ff:ff:ff:ff promiscuity 1 addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 > 5: unt382 at enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 > link/ether 00:0d:b9:34:2a:fe brd ff:ff:ff:ff:ff:ff promiscuity 0 > vlan protocol...

On 02/16/2017 03:28 AM, James Hogarth wrote: > On 16 February 2017 at 10:42, Alice Wonder <alice at domblogger.net> wrote: >> On 02/16/2017 02:32 AM, James Hogarth wrote: >>> >>> On 16 February 2017 at 10:17, Alice Wonder <alice at domblogger.net> wrote: >>>> >>>> On 02/16/2017 02:03 AM, James Hogarth wrote: >>>>>

...mailing list >> CentOS at centos.org >> https://lists.centos.org/mailman/listinfo/centos >> > > ipv6.ip6-privacy: -1 (unknown) > ipv6.addr-gen-mode: stable-privacy > Okay so from the man page: The permitted values are: "eui64", or "stable-privacy". If the property is set to "eui64", the addresses will be generated using the interface tokens derived from hardware address. This makes the host part of the address to stay constant, making it possible to track host's presence when it changes net...

..., when the fail_over_mac bonding parameter was set to fail_over_mac=active. With this update, the underlying source code has been fixed so that the VLANs continue inheriting the MAC address of the active physical interface until the VLAN MAC address is explicitly set to any value. As a result, IPv6 EUI64 addresses for the VLAN can reflect any changes to the MAC address of the physical interface, and Duplicate Address Detection (DAD) behaves as expected. (BZ#1396479) Full details and references: https://access.redhat.com/errata/RHSA-2017:0036?sc_cid=701600000006NHXAA2 CVE Names: CVE-2016-4998 CV...

...b0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [ITHREAD] fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem 0xd0009000-0xd00097ff,0xd0000000-0xd0003fff irq 10 at device 12.0 on pci0 fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:0d:9d:71:9e:43:0c:6a fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:0d:9d:43:0c:6a fwe0: Ethernet address: 02:0d:9d:43:0c...

...9.1 on pci2 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [ITHREAD] fwohci0: <Ricoh R5C552> mem 0xd0203000-0xd02037ff irq 11 at device 9.2 on pci2 fwohci0: [FILTER] fwohci0: OHCI version 1.0 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 06:e4:0a:00:69:4f:10:03 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 06:e4:0a:4f:10:03 fwe0: Ethernet address: 06:e4:0a:4f:10...

...10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fwohci0: vendor=10de, dev=6e fwohci0: <1394 Open Host Controller Interface> mem 0xeb087000-0xeb08703f,0xeb086000-0xeb0867ff irq 11 at device 13.0 on pci0 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:e0:18:00:00:22:9b:d0 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 if_fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:e0:18:22:9b:d0 sbp0: <SBP2/SCSI over firewire&g...

I'm running FreeBSD 7.1-PRERELEASE over Asus P5Q motherboard. Such board comes with an nic requiring age0 driver. When the nic is under load, such trasferring big amount of data over gigabit connection (let's say some gigabyte backups), the computer hangs, sometimes with panic, sometimes freezing. Before that i was using an Intel nic with em0 driver and 7.0-Stable#2.. and that

...ice 8.0 on pci5 sio0: moving to sio4 sio4: type 16550A sio4: [FILTER] fwohci0: <Texas Instruments TSB43AB22/A> mem 0xdb008000-0xdb0087ff,0xdb004000-0xdb007fff irq 16 at device 11.0 on pci5 fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:00:72:dc:3e fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x3e108000 fwe0: <Ethernet over FireWire> on firewir...