search for: enp4s0f0

...BONDING_OPTS="mode=4" #i set mode to active-backup DEFROUTE=yes IPADDR="192.168.xxx.xxx" NETMASK=255.255.255.0 GATEWAY="192.168.xxx.xxx" IPV4_FAILURE_FATAL=no IPV6INIT=no NAME=bond0 DEVICE=bond0 ONBOOT=yes TYPE="Ethernet" MASTER=bond0 SLAVE=yes NAME="enp4s0f0" UUID="xxx" DEVICE="enp4s0f0" ONBOOT="yes" TYPE="Ethernet" MASTER=bond0 SLAVE=yes NAME="enp4s0f0" UUID="xxx" DEVICE="enp4s0f1" ONBOOT="yes" /G?tz

...Sun 2015-05-24 11:39:21 PDT; 8s ago Process: 2935 ExecStart=/usr/sbin/ntpd -u ntp:ntp $OPTIONS (code=exited, status=0/SUCCESS) Main PID: 2936 (ntpd) CGroup: /system.slice/ntpd.service ??2936 /usr/sbin/ntpd -u ntp:ntp -g May 24 11:39:21 cobalt ntpd[2936]: Listen normally on 3 enp4s0f0 10.0.0.160 UDP 123 May 24 11:39:21 cobalt ntpd[2936]: Listen normally on 4 lo ::1 UDP 123 May 24 11:39:21 cobalt ntpd[2936]: Listen normally on 5 enp4s0f0 fe80::ec4:7aff:fe34:1dcc UDP 123 May 24 11:39:21 cobalt ntpd[2936]: Listening on routing socket on fd #22 for interface updates May 24 11:39:...

...UTE=yes > IPADDR="192.168.xxx.xxx" > NETMASK=255.255.255.0 > GATEWAY="192.168.xxx.xxx" > IPV4_FAILURE_FATAL=no > IPV6INIT=no > NAME=bond0 > DEVICE=bond0 > ONBOOT=yes > > > TYPE="Ethernet" > MASTER=bond0 > SLAVE=yes > NAME="enp4s0f0" > UUID="xxx" > DEVICE="enp4s0f0" > ONBOOT="yes" > > TYPE="Ethernet" > MASTER=bond0 > SLAVE=yes > NAME="enp4s0f0" > UUID="xxx" > DEVICE="enp4s0f1" > ONBOOT="yes" should both those...

So I've built my first CentOS 7 host and am learning all the new ways of doing things. I setup and enabled ntpd but after a reboot I get: $ systemctl status ntpd ntpd.service - Network Time Service Loaded: loaded (/usr/lib/systemd/system/ntpd.service; enabled) Active: inactive (dead) After issuing: $ systemctl start ntpd Ntpd runs just fine. But why isn't it loading at boot

...n 224.0.1.1 socket to multicast group 224.0.1.1 May 24 15:15:42 cobalt ntpd[868]: 0.0.0.0 c016 06 restart May 24 15:15:42 cobalt ntpd[868]: 0.0.0.0 c012 02 freq_set kernel 17.232 PPM May 24 15:15:43 cobalt ntpd[868]: 0.0.0.0 c515 05 clock_sync May 24 15:15:49 cobalt ntpd[868]: Listen normally on 5 enp4s0f0 fe80::ec4:7aff:fe34:1dcc UDP 123 May 24 15:15:49 cobalt ntpd[868]: new interface(s) found: waking up resolver May 24 15:15:51 cobalt ntpd[868]: Listen normally on 6 enp4s0f0 10.0.0.160 UDP 123 May 24 15:15:51 cobalt ntpd[868]: io_setbclient: Opened broadcast client on interface #6 enp4s0f0 May 2...

...ast=172.16.255.255 netmask=255.255.0.0 [2018/02/01 12:42:52.524493, 2] ../source3/lib/interface.c:345(add_interface) added interface enp4s0f1 ip=172.16.1.55 bcast=172.16.255.255 netmask=255.255.0.0 [2018/02/01 12:42:52.524506, 2] ../source3/lib/interface.c:345(add_interface) added interface enp4s0f0 ip=172.17.1.4 bcast=172.17.255.255 netmask=255.255.0.0 [2018/02/01 12:42:52.524520, 2] ../source3/lib/interface.c:345(add_interface) added interface virbr0 ip=192.168.122.1 bcast=192.168.122.255 netmask=255.255.255.0 [2018/02/01 12:42:52.525029, 2] ../source3/lib/interface.c:345(add_interface)...

Hi, may be someone has an idea: We have three supermicron servers with two 10Gb Ports each, connected to a cisco switch stack 1Gb ports. All are on auto speed. I configured a LACP bond on both sides on all servers, first with citrix xen server. On one server eth0 goes down from time to time ? maybe within minutes, someday it is up for some hours. Two server are fine; the bond is up for 24

Hi all, I try to update two clustered samba file servers. Right now samba 4.7.0 with ctdb is running on both of them. To update samba I stopped ctdb on one of the servers, and compiled and installed samba 4.7.1 with: ./configure --with-cluster-support --with-shared-modules=idmap_tdb2,idmap_ad,vfs_glusterfs --with-systemd Trying to start ctdb on the updated server fails with "

...ens4f0 iface ens4f0 inet manual address 192.168.84.73 netmask 255.255.255.0 mtu 9014 # 10 Gigabit Port 4 allow-hotplug ens4f1 auto ens4f1 iface ens4f1 inet manual address 192.168.84.74 netmask 255.255.255.0 mtu 9014 # 10 Gigabit Port 5 allow-hotplug enp4s0f0 auto enp4s0f0 iface enp4s0f0 inet manual address 192.168.84.75 netmask 255.255.255.0 mtu 9014 # 10 Gigabit Port 6 allow-hotplug enp4s0f1 auto enp4s0f1 iface enp4s0f1 inet manual address 192.168.84.76 netmask 255.255.255.0 mtu 9014 # 1 Gig Bridge (no...

...ferred master = no doing parameter wide links = yes doing parameter unix extensions = no doing parameter logon home = "" doing parameter logon path = "" doing parameter max stat cache size = 1024 pm_process() returned Yes lp_servicenumber: couldn't find homes added interface enp4s0f0 ip=172.16.25.202 bcast=172.16.31.255 netmask=255.255.248.0 added interface bond0 ip=172.16.40.15 bcast=172.16.40.255 netmask=255.255.255.0 added interface bond1 ip=172.16.41.202 bcast=172.16.41.255 netmask=255.255.255.0 Netbios name list:- my_netbios_names[0]="LIZARDCLUSTER" added inte...

...server 10.97.2.1 --noipv6 # System language lang en_US.UTF-8 # System timezone timezone America/Los_Angeles # Network information #network --bootproto=dhcp --device=eno1 --onboot=yes --ipv6=auto #network --bootproto=dhcp --device=eno2 --onboot=yes --ipv6=auto #network --bootproto=dhcp --device=enp4s0f0 --onboot=yes --ipv6=auto #network --bootproto=dhcp --device=enp4s0f1 --onboot=yes --ipv6=auto #network --bootproto=dhcp --device=enp4s0f2 --onboot=yes --ipv6=auto #network --bootproto=dhcp --device=enp4s0f3 --onboot=yes --ipv6=auto #network --bootproto=dhcp --device=enp7s0f0 --onboot=yes --ipv6...

...Sometimes getent group <groupname> will work on certain groups but not others (especially ones with lots of members). SMB.conf: [global]         workgroup = thedomain_NET         realm = samba.thedomain.net         netbios name = THECLUSTER         security = ADS         interfaces = enp4s0f0         idmap_ldb:use rfc2307 = yes         clustering = yes         log file = /var/log/samba/%I         log level = 1         max log size = 102400    idmap config *:backend = tdb    idmap config *:range = 200000-299999    idmap config thedomain_NET:backend = ad    idmap config thedomai...

Hi List, As the subject states, I'm running a CTDB cluster. Samba is Sernet 4.4.5 in an NT-Style Samba domain (DCs are Centos 6 packaged samba, 3.6.22) Every so often, users are unable to connect to network shares. Most of the problems seem to happen on Windows 7 domain members, but smbclient will also fail to connect. I see these lines in the logs for every attempted connection: