search for: ds21552

...the zaptel and wct1xxp modules are loaded and ztcfg reports no errors: # ztcfg -v Zaptel Configuration ====================== SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) 24 channels configured. and dmesg looks fine too: Zapata Telephony Interface Registered on major 196 Framer: DS21552, Revision: 3 (T1) Found a Wildcard: Digium Wildcard T100P T1/PRI Registered tone zone 0 (United States / North America) Using ESF/B8ZS coding/framing Calling startup (flags is 4099) my zaptel.conf looks like: span=1,0,0,esf,b8zs bchan=1-23 dchan=24 loadzone=us defaultzone=us and zapata.conf cont...

...I used the pinout available here: http://www.digium.com/index.php?menu=faq#General_5 <http://www.digium.com/index.php?menu=faq#General_5> Output from /var/log/messages: Jul 5 13:05:51 rosella kernel: Zapata Telephony Interface Registered on major 196 Jul 5 13:05:51 rosella kernel: Framer: DS21552, Revision: 3 (T1) Jul 5 13:05:51 rosella kernel: Found a Wildcard: Digium Wildcard T100P T1/PRI Jul 5 13:06:06 rosella kernel: Using ESF/B8ZS coding/framing Jul 5 13:06:06 rosella kernel: Calling startup (flags is 4099) I've been using various sources I've found via Google with no luck. h...

...pped to f9b98000 TE410P version c01a009b FALC version: 00000005, Board ID: 00 <registers snipped> TE410P: Launching card: 0 TE410P: Setting up global serial parameters Found a Wildcard: Wildcard TE410P-Xilinx ACPI: PCI interrupt 0000:05:02.0[A] -> GSI 100 (level, low) -> IRQ 100 Framer: DS21552, Revision: 3 (T1) Found a Wildcard: Digium Wildcard T100P T1/PRI Registered tone zone 0 (United States / North America) TE410P: Span 1 configured for ESF/B8ZS SPAN 1: Primary Sync Source TE410P: Span 2 configured for ESF/B8ZS SPAN 2: Secondary Sync Source TE410P: Span 3 configured for ESF/B8ZS SPAN...

...ing me 'location' 'number' not 'name' 'number' but that's fine). Has anyone dealt with this before and/or found workarounds for anything? [relevant portion of dmesg] Zapata Telephony Interface Registered on major 196 PCI: Found IRQ 5 for device 01:00.0 Framer: DS21552, Revision: 3 (T1) Found a Wildcard: Digium Wildcard T100P T1/PRI Registered tone zone 0 (United States / North America) Using ESF/B8ZS coding/framing Calling startup (flags is 4099) Using ESF/B8ZS coding/framing Calling startup (flags is 4099) Registered tone zone 0 (United States / North America)...

...<http://www.digium.com/index.php?menu=faq#General_5> Output from /var/log/messages: Jul 2 11:30:23 rosella sshd(pam_unix)[2601]: session opened for user root by (uid=0) Jul 2 11:30:51 rosella kernel: Zapata Telephony Interface Registered on major 196 Jul 2 11:30:51 rosella kernel: Framer: DS21552, Revision: 3 (T1) Jul 2 11:30:51 rosella kernel: Found a Wildcard: Digium Wildcard T100P T1/PRI Jul 2 11:31:14 rosella kernel: Registered tone zone 0 (United States / North America) Jul 2 11:31:14 rosella kernel: Using ESF/B8ZS coding/framing Jul 2 11:31:14 rosella kernel: Calling startup (fla...

I have about a dozen SIP phones up and working, now I want to connect the asterisk box to our Fujitsu 9600 PBX. I currently have two dial-up servers conencted to the Fujitsu PBX that I built with mgetty/pppd and have the lines provisioned the same way as those dial-up server, ESF, B8ZS, and E&M wink start, so I have confidence in the guys who set up the PBX. I've built a loop back plug

Due to some failed hardware on another platform, I've had to move a T100P card to a different chassis. After this move was completed, I am seeing some strange results on the T100P card that do not display to me any failure mode with which I am familiar. The card comes up, and shows "good" carrier and status, but Asterisk refuses to bring the D-channel up. Calls of course do