Displaying 11 results from an estimated 11 matches for "dial_template".
2009 Jul 28
3
CIsco 7960 + asterisk: hepl needed
..._password: cisco ; Limited to 31 characters (Default - cisco)
sntp_mode: directedbroadcast ;"unicast"
sntp_server: 192.168.1.77
time_zone: GMT+01/00 ; assuming you're in GMT
time_format_24hr: 1 ; to show the time in 24hour format
date_format: D/M/Y ; format you would like the date in
dial_template: dialplan
SIP<MAC>.cnf:
image_version: P0S3-8-12-00
line1_name: 55
line1_authname: 55
line1_shortname: 55 ; displayed on the phones softkey
line1_password: 12345655
line1_displayname: "Lukasz Cisco7960"; the caller id
proxy1_port: 5060
proxy1_address: 192.168.1.109
# Phone Label...
2006 Feb 28
10
A room full of Cisco 7960s behind NAT
...sername/auth name mismatch
What's the right way to do this. Shown below are my configuration files:
</edg>
-----SIPDefault and SIPMacAddr -----
image_version: P0S3-07-4-00
tftp_cfg_dir: "" ; Example: ./sip_phone/
proxy_register: 1
timer_register_expires: 3600
dial_template: dialplan
messages_uri: 3688
telnet_level: 2
phone_label: "Nat One"
line1_name: 3115552368
line1_shortname: 3115552368
line1_authname: 3115552368
line1_password: 3115552368
line1_displayname: "Nat One"
logo_url: "http://192.168.1.45/pts.bmp"
nat_address: 64.169.xx.xxx...
2008 Oct 15
1
Cisco 7960 not always receiving incoming calls
...Cisco 7960:
SIPDefault.cnf
image_version: P0S3-08-9-00
proxy1_address: neocipher.net ; Can be dotted IP or FQDN
proxy_register: 1
messages_uri: "100"
phone_password: "cisco" ; Limited to 31 characters (Default - cisco)
sntp_server: 10.10.10.1
time_zone: EST
dial_template: DIALPLAN
nat_enable: 1
nat_address: 172.16.2.1
nat_received_processing: 1
outbound_proxy_port: 5060
outbond_proxy: ns1.neocipher.net
SIP0112B9EAFF72.cnf
image_version: P0S3-08-9-00
# Line 1 Setup
line1_name: 101
line1_authname: 101
line1_shortname: "Line 101"
line1_password: "tes...
2005 Jul 26
2
7960 SIP Firmware Upgrade Strange Problem
...user control,
3-enabled with no user control)
call_waiting: "1" ; Default 1 (Call Waiting enabled)
# DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127)
dtmf_avt_payload: "101" ; Default 100
# XML file that specifies the dialplan desired
dial_template: "dialplan"
# Network Media Type (auto, full100, full10, half100, half10)
network_media_type: "auto"
#Autocompletion During Dial (0-off, 1-on [default])
autocomplete: "1"
#Time Format (0-12hr, 1-24hr [default])
time_format_24hr: "0"
# URL for external...
2006 Mar 21
5
Cisco POS 3-08-2
Anyone have experience with the 3-08-2 release of Cisco's SIP firmware?
Are there any new features in the SIPDefault.cnf?
Thanks,
Ron
2004 Sep 29
3
Dial Delay
I've dug through the documentation, and I must have just glanced over
this, but how do I set this system up so it executes the call when 4
digits have been entered. Currently it seems to be operating on a
timeout system.
Cisco 7940's
Right now if I press the digits 6000 the phone waits like 8 seconds
before going forward. (If I press dial it is immediate).
Anybody?
-C
2004 Dec 16
0
FW: Cisco 7960 (SIP) hold problems
...user control,
3-enabled with no user control)
call_waiting: "1" ; Default 1 (Call Waiting enabled)
# DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127)
dtmf_avt_payload: "101" ; Default 100
# XML file that specifies the dialplan desired
dial_template: "dialplan"
# Network Media Type (auto, full100, full10, half100, half10)
network_media_type: "auto"
#Autocompletion During Dial (0-off, 1-on [default])
autocomplete: "1"
#Time Format (0-12hr, 1-24hr [default])
time_format_24hr: "1"
####### New Parameters...
2004 Jul 18
4
Cisco 7960 SIP V6 and IBM A30P Fedora Asterisk
...4-3db up, 5-6dB up)
dtmf_db_level: 3
# SIP Timers
timer_t1: 500 ; Default 500 msec
timer_t2: 4000 ; Default 4 sec
sip_retx: 10 ; Default 10
sip_invite_retx: 6 ; Default 6
timer_invite_expires: 180 ; Default 180 sec
# Dialplan template (.xml format file relative to the TFTP root directory)
dial_template: dialplan
# TFTP Phone Specific Configuration File Directory
tftp_cfg_dir: "" ; Example: ./sip_phone/
# Time Server (There are multiple values and configurations refer to Admin Guide for Specifics)
sntp_server: "137.222.10.60" ; SNTP Server IP Address
sntp_mode: anycast ; u...
2004 Oct 04
1
Cisco 7960G w/ SIP not working properly
...sec
timer_t2: 4000 ; Default 4 sec
sip_retx: 10 ; Default 10
sip_invite_retx: 6 ; Default 6
timer_invite_expires: 180 ; Default 180 sec
####### New Parameters added in Release 2.0 #######
# Dialplan template (.xml format file relative to the TFTP root directory)
dial_template: dialplan
# TFTP Phone Specific Configuration File Directory
tftp_cfg_dir: "" ; Example: ./sip_phone/
# Time Server (There are multiple values and configurations refer to
Admin Guide for Specifics)
sntp_server: "192.168.17.11" ; SNTP Server IP Address
sntp_mode: d...
2004 Dec 12
2
Caller ID info ZAP --> SIP??
Hi everyone,
I've been toying with * for quite some time now. I've got two Cisco
7940's with the SIP firmware playing nice with *. I can also make
outbound calls via IAXTel (toll-free calls only) and all other calls I
have routed out my X100P-clone adapter.
Here's my question... Is there a way to capture the inbound callerid from
my phone line (coming in on the X100P) and have
2005 Jan 26
7
Howto Setup TFTP server on Linux for Cisco 7 960
Thanks
But how about the config files (SIP...) that needs to be inside the tftp
server, where can I get a sample of that?
That's where the images for the firmwares of the ip phones come from, on
boot right?
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Alen Salamun
Sent: Wednesday, January 26, 2005 5:47