search for: dahdi_dummi

Hello there: I think I have a silly kernel configuration problem. I'm running: * vanilla 2.6.27.10 kernel built from source * dahdi-2.1.0.4 built from source So far so good, dahdi module loads just fine: dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.1.0.4 when I try to: hal04 dahdi # modprobe dahdi_dummy FATAL: Error inserting dahdi_dummy

I updated Asterisk to 1.6.2.7 and now the user introduction in the meetme application is no longer working: [May 27 09:26:51] WARNING[2407]: channel.c:4034 ast_request: No channel type registered for 'DAHDI' -- Created MeetMe conference 1023 for conference '800' [May 27 09:26:51] WARNING[2407]: app_meetme.c:3640 find_conf: No DAHDI channel available for conference, user

Usually I used real Digium cards in asterisk systems, so I'm running into this for the first time. dahdi_tool reports that dahdi_dummy is in state UNCONFIGURED. This isn't super surprising, as it seems like the configuration files for DAHDI are really intended only for configuring real physical cards. But that begs the question: Is there any legal DAHDI configuration for dahdi_dummy such

I'm playing around with an ALIX 2D2 board (http://www.pcengines.ch/alix2d2.htm). It's a fanless, x86 system using an AMD Geode processor with 256MB of RAM. Also available are two network interfaces, two USB ports and one serial port (no keyboard or VGA). I'm using the Voyage Linux distro, which basically is Debian Lenny optimized for this board. Asterisk 1.6.1.12 runs fine on the

Hi to all. I'm trying to use meetme on asterisk 1.4.22.1. On a debian i've compiled (as i need h323 support) openh323_v1_18_0 pwlib_v1_10_0 dahdi-linux-2.1.0.3 dahdi-tools-2.1.0.2 asterisk-1.4.22.1 All works fine, dahdi status is: asterik:/data/programmi# /etc/init.d/dahdi status ### Span 1: DAHDI_DUMMY/1 "DAHDI_DUMMY/1 (source: RTC) 1" (MASTER) asterik:/data/programmi#

Hi, I have some servers that are dedicated to do meetme conferencing. From some previous test i concluded that I need to use dahdi_dummy as it is more accurate. If I did use the core timers in dahdi (not loading dahdi_dummy) I got bad quality in the conferences and dahdi_test showed 99.6% as worst. I thought maybe the issue as bad hardware for the timing or something else. But today I

Hi, I need to run ztdummy for Paging, but now that this is all become dahdi I don`t really know where to start. I did build dahdi before building asterisk, but that`s it. I find it hard to find any documentation referring to dadhi instead of zaptel. I have no Digium hardware, but I still need the ztdummy timer (or whatever it`s called now). How do I get myself going? Regards,

Howdy, I am playing around with asterisk within an LXC container on Ubuntu 11.04. I have asterisk (1.4.42) running fine, but want access to dahdi_dummy for timing (meetme). I have dahdi installed on the "host", and dahdi_dummy is loaded: root at astnorth:/# ls -ltr /dev/dahdi total 0 crw-rw---- 1 root root 196, 250 2011-06-08 13:59 transcode crw-rw---- 1 root root 196, 253

I am installing dahdi on a machine lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Hewlett-Packard Company Unknown device 9602 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD]

I have a TDM400. Just updated Fedora 12 to kernel 2.6.32. Rebuilt and installed dahdi-2.2.1. kernel modules loaded. lsmod | grep wctdm wctdm 37233 0 dahdi 194985 1 wctdm lsmod | grep dahdi dahdi 194985 1 wctdm crc_ccitt 1549 2 dahdi,isdnhdlc dmesg: dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.2.1

Hi. I have a Debian Leni system with asterisk-1.8. I was trying to get meetme to work and it depends on dahdi, so I compiled dahdi-trunk and dahdi-tools-trunk, however, when trying to insert dahdi_dummy, it complained about symbol crc_ccitt_table, although the module was actually there in the kernel tree. So, I took the Debian source, and I had the config and I did make Bzimage, make modules

> > Hello - how do I setup the echo cancellers for dahdi if I am only using the > dummy driver (no hardware)? I'm using a SIP only environment with echo > problems.Thanks, > Carlos > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090128/aad3e3ce/attachment.htm

Tengo en una maquia ubuntu 8.10 el kernel es Linux 2.6.27-14-generic Quiero configurar una tarjeta x100p i usarla con asterisk, asi que descague compile e instale lo siguiente: asterisk-1.4.24 dahdi-linux-2.1.0.4 dahdi-tools-2.1.0.2 libpri-1.4.9 Sin embargo no logro configurar la tarjeta con exito, ya probe casi? todo. Esto aparece si ejecuto lspci: 04:06.0 Communication controller: Motorola

Hi guys, I'm currently playing around with optimizing an Asterisk install (trying to remove as many possible configuration files as possible) for testing and debugging purposes. I've been able to remove most of the files and maintain an error-less Asterisk full file, with a single exception: I can't seem to remove `chan_dahdi.conf` without having Asterisk complain in the full logs:

1. Is it normal to see : # lsmod Module Size Used by dahdi_dummy 3236 0 Shouldn't it be used by asterisk or is this 0 value meaning something specific ? 2. How can you check dahdi is running ? Here, "ps aux | grep dahdi " replies "grep dahdi". Cheers ------=_Part_2692_19661943.1228286635399 Content-Type: text/html; charset=ISO-8859-1

Is there a method or can there be a method added to dahdi to only compile for dadhi_dummy? No other modules are needed sometimes. no firmware downloads are needed. Thanks, Jerry

Hi, Vinicius, did you actually solve the choppy audio issue by compiling Gordon's kernel? I have the same problem on the exact same Alix platform (using kernel 2.6.31, though). regards, Darko ps. Sorry everyone if this mail does not get threaded right. I've just joined the mailing list and not sure how to reply to an existing thread I found on the web. -------------- next part

Hello I was editing files manually, and noticed that if I include the familiar "fxsks=1" in /etc/dahdi/system.conf, Dahdi fails loading: ===================== # cat /etc/dahdi/system.conf loadzone = fr defaultzone = fr fxsks=1 ===================== # /etc/init.d/dahdi start Loading DAHDI hardware modules: wctdm: [ OK ] /usr/share/dahdi/waitfor_xpds: Missing

I am having problems getting a Nicherons TDM400P wildcard clone to dial out. Everything appears to be configured correctly, but although I see call progress, it never seems to actually pick up the phone. (The following is a test of 911 emergency, where I substitute 811 [repair service] as the actual number dialed.) *CLI> -- Executing [911 at from-internal:1]

Hi I am in the process of installing a new box and using dahdi. I have a tdm410 + hardware echo canceller. I have just read in the read me for dadhi that VPMADT032 support has been removed and unlike with the zaptel stuff i could just download and install the firmware I can't with dahdi what is the best way forward to recompile with hardware echo canceller support. Thanks Alex