search for: cp1500pfclcd

Anyone familiar with Cyberpower's model numbers? I finally got sick of my Tripplite's USB port going south, all the time, so I'm looking to replace it. The HCL has an entry for a Cyberpower model CP1500AVRLCD. Not listed is the CP1500PFCLCD model, a newer, premium version of the unit; but the HCL does have an entry for the CP1000PFCLCD model. Pretty sure that the CP1500PFCLCD will work; but figure I ask if anyone knows for sure. -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Typ...

Charles Lepple writes: > On Nov 12, 2017, at 10:08 AM, Sam Varshavchik wrote: > > > > The HCL has an entry for a Cyberpower model CP1500AVRLCD. Not listed is > the CP1500PFCLCD model, a newer, premium version of the unit; but the HCL > does have an entry for the CP1000PFCLCD model. > > > > Pretty sure that the CP1500PFCLCD will work; but figure I ask if anyone > knows for sure. > > > > We have a bit of a backlog of HCL/DDL entries that ha...

Dear NUT users, I have installed OmniOS+ napp-it on a HP Proliant n54l. This box is powered by a cyberpower CP1500PFCLCD ups. I have installed nut thanks to that link: http://wiki.openindiana.org/oi/Network+UPS+Tools+(NUT)+and+NUT+Monitor The issue is that the driver does not load at startup - but it does if i start it as root using upsdrvctl -u root start. Beside the startup driver launch, everything is fine. I d...

...want my QNAP NAS TS-231 to work as a master and send signal to the PC to shut it down during power outage. I configured QNAP properly (like this: http://geekbeat.tv/qnap-adding-external-devices-qnap), but I don't know what to do next. > > I work on Win10, WinNUT-2.0.0.4a UPS: CYBERPOWER CP1500PFCLCD > I have no idea how to config monitoring. This part: MONITOR <system> <powervalue> <username> <password> ("master"|"slave") > > I found somewhere that I should add a line: > MONITOR qnapups@<IP ADDRESS OF MY COMPUTER>:3493 1 admin 123...

...it work. I want my QNAP NAS TS-231 to work as a master and send signal to the PC to shut it down during power outage. I configured QNAP properly (like this: http://geekbeat.tv/qnap-adding-external-devices-qnap), but I don't know what to do next. I work on Win10, WinNUT-2.0.0.4a UPS: CYBERPOWER CP1500PFCLCD I have no idea how to config monitoring. This part: MONITOR <system> <powervalue> <username> <password> ("master"|"slave") I found somewhere that I should add a line: MONITOR qnapups@<IP ADDRESS OF MY COMPUTER>:3493 1 admin 123456 slave After sta...

Since there is apparently no immediate solution to upsstats.cgi not reading the output voltage correctly, I have moved on to trying to use upsset.cgi. To recap the UPS is a CyberPower CyberPower CP1500PFCLCD UPS running on a headless server running Slackware 14.1 with the 3.10.7 kernel. The version of NUT is 2.71 and I am using usbhid-ups for communication with the UPS The problem is that when I run upsset.cgi I first get a prompt for user name and password. I then enter the same username and passwo...

Bill S wrote, On 4/15/2014 11:18 AM: > The problem is that when I run upsset.cgi I first get a prompt for > user name and password. I then enter the same username and password > as I established in upsd.users and it seems to accept it. upsset.cgi doesn't check that user/password is valid, it just tries it when doing a command. I just tested it, it is working for me on a remote and

On Oct 26, 2016, at 4:56 AM, Tomasz Przychodzie? wrote: > > Level INFO 10/26/2016 10:46:17 Detected OS as Windows NT > Level NOTICE 10/26/2016 10:46:17 Network UPS Tools upsmon 2.0.0.4 > Level INFO 10/26/2016 10:46:17 Config Load: MINSUPPLIES set to 1 > Level INFO 10/26/2016 10:46:17 Config Load: NOTIFYCMD set to "c:\Program

On Oct 26, 2016, at 8:41 AM, Tomasz Przychodzie? wrote: > > This was only the log from the program. I'm sending my upsmon.conf attached (I removed nas ip number, admin login and pass (no spaces in parameters) and also changed back minsupplies to 1), the rest of the settings are the same as I used. > Be sure that the configuration file does not have a "#" before

Hello, I have a CyberPower CP1500PFCLCD and I'm trying to get nut to see it under OpenIndiana. All search online suggested that it basically can't happen, but I decided to ask again, maybe things have changed since then. The UPS can be seen by the system: # /usr/sbin/cfgadm -lv usb9/1.1 Ap_Id Receptacle...

This was only the log from the program. I'm sending my upsmon.conf attached (I removed nas ip number, admin login and pass (no spaces in parameters) and also changed back minsupplies to 1), the rest of the settings are the same as I used. Best, Tom 2016-10-26 14:21 GMT+02:00 Charles Lepple <clepple at gmail.com>: > On Oct 26, 2016, at 4:56 AM, Tomasz Przychodzie? wrote: > >

OS: Raspbian Lite 4.19 (Linux 5.4.51-v7l+ armv7l) NUT version: 2.7.4 Install Method: Package (apt-get) Device Name: CyberPower CP1500PFCLCD, connected via USB Problem: This is a brand-new installation; the only step I've taken is my initial edit of /etc/nut/ups.conf (which I'll post below). I started the driver and after doing so issued a reboot command to my Raspberry Pi (sudo reboot). After doing so my UPS rebooted itself, qu...

...to work as a master and send signal to the PC to shut it > down during power outage. I configured QNAP properly (like this: > http://geekbeat.tv/qnap-adding-external-devices-qnap), but I don't know > what to do next. > > > > I work on Win10, WinNUT-2.0.0.4a UPS: CYBERPOWER CP1500PFCLCD > > I have no idea how to config monitoring. This part: MONITOR <system> > <powervalue> <username> <password> ("master"|"slave") > > > > I found somewhere that I should add a line: > > MONITOR qnapups@<IP ADDRESS OF MY COMPUT...

Hi all, I am doing some final testing of the libusb-1.0 branch (specifically https://github.com/zykh/nut.git branch libusb-1.0+0.1 @ dfd514e7), and I am running across a regression in usbhid-ups relative to the previous libusb-0.1 code running on FreeBSD. Basically, the master (2.7.4+; c703fa75) code was able to start running as root, drop privileges (usually to uucp, the default for the ports

...7 Checking device (10C4/EA60) 0.005834 Failed to open device, skipping. (Access denied (insufficient permissions)) 0.005841 Checking device (0764/0501) 0.006592 - VendorID: 0764 0.006603 - ProductID: 0501 0.006606 - Manufacturer: CPS 0.006608 - Product: CP1500PFCLCD 0.006611 - Serial Number: 000000000000 0.006614 - Bus: 003 0.006616 - Device release number: 0001 0.006620 Trying to match device 0.006644 Device matches 0.006648 Reading first configuration descriptor 0.006655 auto detached kernel driver from USB de...

...-n "${systemdsystemunitdir}"; then - systemdsystemshutdowndir="${libdir}/systemd/system-shutdown" + systemdsystemshutdowndir="`$PKG_CONFIG --variable=systemdshutdowndir systemd`" This experiment also coincides with the delivery and installation of my new Cyberpower CP1500PFCLCD. Slightly hampered by the nut-scanner problem, I grabbed the USB ids from lsusb. It came up without any issues: [root at monster system]# upsc nutdev1 battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 1410 battery.runtime.low: 300 batte...

> On Dec 3, 2016, at 12:31 PM, Jack McGee <jack at greendesk.net> wrote: >> so this is progress. Thanks! Anything else to check to know it is working as it should? http://networkupstools.org/docs/user-manual.chunked/ar01s06.html#Testing_shutdowns The "FSD" test is more for the NUT logic, which isn't too complicated with only one UPS and one server. If you want to

I'm using Nas4Free, and I'm getting the following message all the time in the Daemon log: usbhid-ups[42466]: libusb_get_report: Unknown Error I'm running Nas4Free 9.2.0.1 Shigawire Driver usbhid-ups Nut Version is 2.7.1 Internal verion 0.38 UPS Info from Nas4Free Manufacturer:CP1500PFCLCD Model:CRCA102*AF1 The model UPS I'm running is a Cyber Power CP1500PFCLCD, other than this error, the UPS seems to be communicating fine with the system, I'm getting information from it, and I have tested it, and it seems to work just fine shutting down the system gracefully upon power lo...

...wing message all the time in the Daemon log: > > usbhid-ups[42466]: libusb_get_report: Unknown Error > > I'm running Nas4Free 9.2.0.1 Shigawire > Driver usbhid-ups > Nut Version is 2.7.1 > Internal verion 0.38 > > UPS Info from Nas4Free > > Manufacturer:CP1500PFCLCD > Model:CRCA102*AF1 > > The model UPS I'm running is a Cyber Power CP1500PFCLCD, other than this error, the UPS seems to be communicating fine with the system, I'm getting information from it, and I have tested it, and it seems to work just fine shutting down the system gracefull...

...UPS1 at 192.168.0.105 Init SSL without certificate database battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 3840 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 24.0 battery.voltage.nominal: 24 device.mfr: CPS device.model: CP1500PFCLCD device.serial: 000000000000 device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.synchronous: no driver.parameter.vendorid: 0764 driver.version: 2.7.4.1 driver.version.data: CyberPower HID 0.4 driver.ver...