search for: chanunavailable

I've got a setup where we have 100 DID's. Our default dialplan has one line that calls a macro: exten => _22XX,1,Macro(STDEXT,${EXTEN}) The macro is pretty basic: [macro-STDEXT] exten => s,1,NoOp exten => s,2,Dial(SIP/${ARG1},15,Tt) exten => s,3,Goto(s-${DIALSTATUS},1) exten => s-NOANSWER,1,Voicemail(${ARG1}|u) exten => s-NOANSWER,n,Hangup exten =>

Greetings to all, I ma having a problem with channel variables on a couple of our Asterisk boxes. Here is the setup. Asterisk on customer's site (1.2.5), using IAX to our external GW (1.2.5), IAX to PSTN GW (1.0.10), E1/PRI to PSTN. On the External GW, we also have an IAX trunk to a VOIP provider if for some reason the E1 is down. If the DIALSTATUS is CHANUNAVAIL, which should be

Just throwing this out here, hopefully someone can tell me why. *CLI> show version Asterisk CVS-HEAD-11/17/04-10:16:38 built by root@wanderer on a i686 running Linux Zap/g1 is pri_cpe to Bell Canada 5551234 is a normal POTS line I have busied out (handset offhook) exten => 1234,1,Dial(Zap/g1/5551234,,g) exten => 1234,n,NoOp(HANGUPCAUSE is ${HANGUPCAUSE} and DIALSTATUS is

Hi, I'm using the macro below in extensions.conf for most of my outbound calls. One issue with my current configuration is that when I make an outbound call it doesn't properly detect that my PSTN line (Zap/1) is busy with another call and then overflow to my outbound IAX connections. I think the root cause is that DIALSTATUS gets reported as BUSY. The debug output is below. My desired

Dear, I have this scenario: - PBX Asterisk 1.6.2.10 with private IP 192.168.0.10 - Behind a Cisco ASA firewall that connects to Internet - SIP trunk to Net2Phone with these parameters (nat=no): host=200.58.113.60 username=DOLLY secret=123456 port=5060 type=peer dtmfmode=rfc2833 disallow=all allow=alaw&ulaw nat=no canreinvite=no qualify=yes -Softphones Xlite The PBX can't register to

AsteriskNOW 1.4.26.2 with a Digium TE205P connected to an ISDN PRI (single span). I'm sure I just have something goofed up in the dialplans? I have a bunch of Polycom 331 IP phones connecting to the server. I can dial the other extensions in the system fine and I can dial long distance outgoing but cannot seem to get it to dial local (7 digit) calls. I see this in the CLI: --

Hi This is the output from show dialplan dial-sipmnf-sippt-pstn [ Context 'dial-sipmnf-sippt-pstn' created by 'pbx_config' ] 's' => 1. Verbose(1,Dialing ${ARG1} on mnf pt pstn) [pbx_config] 2. Dial(SIP/${ARG1}@${SIPMNF},${ARG2},${OUTBDIAL}) [pbx_config] 3. Set(GLOBAL(FOUNDME)=${DIALSTATUS}) [pbx_config]

Hi. I'm dialling two numbers - one that's unobtainable, one that's busy. ${DIALSTATUS} is coming back ANSWER each time right before the channels hang up. Am using the following dialplan macro to dial out. [macro-advdial] exten => s,1,Dial(${ARG1},20,g) ; Ring the interface, 20 seconds maximum exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status

How do you enable call waiting on sip phones? Ive looked and googled and can only find call waiting pstn phones butnot for sip. Is their a way of setting this up within the dailplan?

What is involved in provisioning Asterisk to use a multiline analog service from our local telco? I will only have one twisted pair entering in on a OpenVox card but am not sure how Asterisk interprets and deals with two incoming calls and/or two outgoing calls? Thanks! jlc

1.6.2.0-rc1. I am having trouble with voice mail intermittently not working correctly on CHANUNAVAIL. (it may happen for other statuses too, haven't checked). Basically here's what happens: -- Executing [1651xxxxxx at mydids:1] Macro("SIP/ipkall-trunk-14838bc8", "phone,1651xxxxxx") in new stack -- Executing [s at macro-phone:1]

Hi, We have been migrating our PBX system from Asterisk 1.8 and chan_sip to Asterisk 13 and chan_pjsip. Things are mostly, ok, but now I have stumbled on a behaviour difference I don't like. With chan_pjsip when a phone went unexpectedly offline (Ethernet cable disconnected) Asterisk would detect this quickly (through the 'qualify' pings), mark the phone as 'Unavailable' and

Does anyone know what this error message means? Unable to create channel of type 'DAHDI' (cause 0 - Unknown) I've upgraded to 1.6.0 with dahdi 2.0. For some reason my outbound dahdi calls are not going through. At some point, it starts to work, but I don't know what the trigger is. Out of the blue, outbound calls start to work. I had been using asterisk-1.6-beta9 with zaptel

Hi, I have an odd problem when doing a blind transfer. The transfer is intiated and the transferred caller hears nothing until the timeout. I have tried setting the 'r' and the 'm' variables in the dial command. Nothing happens when I use the 'r' variable when I use the 'm' variable I briefly hear music on hold and then it stops until the timeout for no answer

I can dial from 601 to a public number. The public number rings. I pickup and hear nothing, while on 601 it keeps ringing. (BTW, is it right to say "ringing" on the active phone?) The *CLI> doesn't show me anything useful: Executing Macro("SIP/601-8238", "dial-pstn|88097880|") in new stack Executing SetGlobalVar("SIP/601-8238",

I encountered this strange problem which is I can call into Asterisk box but I cannot call out. I was successful before using exactly the same euroISDN line but with TE110 and different versions of Asterisk. This time, I am using: . TE410 . Asterisk 1.4.13 . Zaptel 1.4.6 . Libpri 1.4.2 1) I put the following into extensions.conf to get to the outside line exten => 0,1,Dial(Zap/1) 2)

Dear all, i have a problem with a system running - Ubuntu 10.04 ( all updates done ) - ii asterisk 1:1.8.5.0-1digium1~lucid Open Source Private Branch Exchange (PBX) - ii asterisk-dahdi 1:1.8.5.0-1digium1~lucid DAHDI devices support for the Asterisk PBX I also use freepbx 2.9 for the configuration. Hardware is a Dell R410 and a Digium

Hello I've been having the following problem today : I have a quite simple dialplan made to receive a fax: [answer-extension] exten => 1,1,Answer exten => 1,2,Macro(setcallerid) exten => 1,3,Ringing exten => 1,4,Wait(3) exten => 1,5,Macro(stdfwd3iax-notransfer,${EXTENSION},${EXTENSION},$ {EXTENSION}) exten => fax,1,Goto(faxreceive,1,1) The Wait(3) is there simply to let

Hi I am using Asterisk 1.2 and for the life of me, I am unable to transfer outbound calls (eg calls I initiate from sip extensions). When I press #, nothing happens. Inbound calls transfer fine, but only once per call. The problem happens: - With both software and hardware phones. - With calls going out through the ZAP channel and to internal SIP extensions. - After I have transferred an

Egads. Getting queues to work is like pulling teeth. extensions.conf: exten => q_main,1,Queue(oneeighty_main||||1) exten => 80014055,1,Dial(SIP/80014018,15,tr) exten => 80014057,1,Dial(SIP/80014018,15,tr) exten => 80014052,1,Dial(SIP/80014018,15,tr) queues.conf: [oneeighty_main] musiconhold = default joinempty = strict leavewhenempty = strict strategy = rrmemory retry = 0 member