search for: busytones

Hiya, here is a patch to fix that: [root@mailmx2 channels]# cvs diff chan_vpb.c Index: chan_vpb.c =================================================================== RCS file: /usr/cvsroot/asterisk/channels/chan_vpb.c,v retrieving revision 1.9 diff -r1.9 chan_vpb.c 100,102c100,102 < static VPB_TONE Dialtone = {440, 440, 440, 0, 0, 0, 5000, 0 }; < static VPB_TONE Busytone = {440,

Hello, I have two sip phones (zoiper). Earlier these used to communicate using the settings below for sip.conf and extensions.conf and now we asterisk 1.8.29.0, so these phones have stopped communicating. My question is that does 1.8.29.0 release require any more changes to be done to the sip.conf and extensions.conf to make the below work ? The sip.conf contains following enteries

dear Hackers, i have a voicetronix Openswitch card, and i have been finding it very dificult to get it to work with asterisk. i intend to connect 8 ports to the PSTN and 4 as station ports. problem 1: On running asterisk all i get at first i get : event[9=>[11] station OFF hook] on vpb/1-12 even [12=>[11] loop drop on vpb/1-12 event [12=>[11] Tone detect:GRUNT event [2=>[11] Dial

Hello. All. I am a bit new to asterisk, started from half a month ago. I am setting up a home asterisk server with analog card. I am using asterisk 1.4.27. At the moment, I bought a X100P card and installed it on my computer. I used it to connect my home phone line. For the moment, it works fine when dial in. Soon I noticed when I dial out through it to my mobile, it can't hang up

When I try to connect to * using a Cisco ATA 188 configured with a MGPC firmware (v3.1.1), I just keep getting this message every 30 seconds or so : May 10 10:08:21 NOTICE[7913]: chan_mgcp.c:1509 find_subchannel: Gateway '192.168.1.27' (and thus its endpoint '*') does not exist Using tcpdump, I have checked that the ATA188 (with IP 192.168.1.27 and port 2427) sends UDP packets to

Hi I'm new with asterisk, and I?m trying to install it with a X100P card. I stuck on some problems/issues. Could someone clarify me some points ? 1. I did a cvs checkout, did a 'make' and 'make install' . From the make output seems that some headers (.h) files for some codecs are missing. Is that ok? 2. Zaptel and Libpri did make and make install without noticeable

Good day all I'm getting this error while trying to dial out on my asterisk server using a openline4 card "exception caught: VPBAPI_DIAL_INVALID_LEVEL, file: vpbdial.cpp line:872" Please Help me

Hi, I've been debuging the call disconnection problem in our architecture: PSTN---E1---OldPBX---E1---Asterisk This is our problem: -SIP user agent "A" calls a pstn phone "B". -"B" hangs up the call. -SIP user agent "A" starts listenning busytones... But the call still on. (and being payed). - Call only ends when it is correctly hanged up in the SIPphone. I've been tracing the communications between the OldPBX (NETWORK) and Asterisk (USER SIDE) and i found this: M03 PROGRESS I08 Cause Coding Std=CCITT Location= Private net-remote Caus...

Hi all, My scenario is this one: LandLine------------------E1---------------|-------------| |-------------------| |OLDPBX|-------E1-----------|Asterisk1.2.5|-----VoIPusers GSMGateway---------Analogue------ |-------------| |-------------------| What is happening: 1- SipUserAgent "A" Dials a call to a Local Extension "B" in the OldPbx 2- "B" , the called party

Hello, Hacker I install VoiceTronix OpenSwitch 12 port PCI Telephone Card, and setting vpb.conf, extensions.conf following My problem is: When i dial to fxo(channel 9-12), it is ok, but when i continue press exten 102, the channel crach with error messages following exception caught: VPBAPI_DIAL_INVALID_LEVEL, file: vpbdial.cpp line:872 Do i ignore some setting for VoiceTronix OpenSwitch12