search for: bge3

...00-0xf6b7ffff irq 32 at device 0.2 on pci3 bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus2: <MII bus> on bge2 bge2: Ethernet address: 2c:76:8a:54:08:16 bge3: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0xf6b60000-0xf6b6ffff, 0xf6b50000-0xf6b5ffff,0xf6b40000-0xf6b4ffff irq 36 at device 0.3 on pci3 bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus3: <MII bus> on bge3...

...gation of 2 NICs of 1 Gbit/s doesn''t report a speed of 2 GBit/s ? [root at nazgul /]# dladm show-dev bge0 link: up speed: 1000Mb duplex: full bge1 link: down speed: 0Mb duplex: unknown bge2 link: down speed: 0Mb duplex: unknown bge3 link: down speed: 0Mb duplex: unknown --- Aggregation creation: bge1 & bge2 aggregated, BW = 2 Gbps --- [root at nazgul /]# dladm create-aggr -d bge1 -d bge2 1 [root at nazgul /]# dladm show-link bge0 type: non-vlan mtu: 1500 device: bge0 bge1 t...

I'm experiencing similar problems with a 3C996-T under 4.8-REL. In particular, connecting a 4.8-REL machine to a 5.1-REL machine leads to some interesting situations: I can do simple pings across the link, but ssh fails, and heavy pings crash the 4.8 machine. Similarly changing the interface configuration with ifconfig tends to crash the 4.8 machine (mtu, link0, up/down, etc). The

...M5720C 1000BASE-T media interface> PHY 1 on miibus2 brgphy2: OUI 0x001be9, model 0x0036, rev. 0 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge2: bpf attached bge2: Ethernet address: 18:03:73:fd:9e:34 bge3: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0xd51d0000-0xd51dffff,0xd51e0000-0xd51effff,0xd51f0000-0xd51fffff irq 38 at device 0.1 on pci1 bge3: APE FW version: NCSI v1.0.80.0 bge3: attempting to allocate 1 MSI vectors (8 supported) msi: routing MSI IRQ 267 to local APIC 0...

Hi, how can ip instances be used with vlans ? Is that possible ? I don''t know how to configure this, if I only have one interface (e.g. bge0), and want to assign e.g. bge1000 to a zone. Any cookbooks available ? Thanks Detlef

I opened a bug report earlier today but it doesn''t seem to have been added to the bugs database. I''m posting here in case one of the Crossbow developers might see it and confirm this behavior. Description Duplicate packets are generated whenever an aggregate is introduced into the network configuration. We''ve ruled out switch ports and physical bge interfaces as

Hi, this server, a Dell R720 has 4 bge on board, Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000 bge0: APE FW version: NCSI v1.1.7.0 bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus0: <MII bus> on bge0 ... I have connected the ethernet to port labeled 0, but it appears as bge2, how can this be corrected? thanks, danny

On OpenSolaris 2009.06 I created a flow, half a dozen VNICs, and I set some properties, and everything was working, then I rebooted my system and everything disappeared from show-vnic, show-flow, and show-prop. When I tried to re-create the objects, dladm said they already existed. While I could not see the objects, I could delete them. Example: # dladm show-vnic # dladm create-vnic -l bge0

...ituting charset 'ISO8859-1' for LOCALE Substituting charset 'ISO8859-1' for LOCALE Substituting charset 'ISO8859-1' for LOCALE Substituting charset 'ISO8859-1' for LOCALE added interface bge1 ip=172.16.0.130 bcast=172.16.0.255 netmask=255.255.255.128 added interface bge3 ip=172.16.1.2 bcast=172.16.1.127 netmask=255.255.255.128 added interface clprivnet0 ip=172.16.4.2 bcast=172.16.5.255 netmask=255.255.254.0 added interface bge0 ip=10.10.10.43 bcast=10.10.10.255 netmask=255.255.255.0 added interface bge0:2 ip=10.10.10.60 bcast=10.10.10.255 netmask=255.255.255.0 a...

Hello list. I'm trying to rebuild the 2.6.9.67.0.20.EL kernel, but it fails even without modifications. How did I try it? Created a (non-root) build environment (not a mock ) Installed the kernel.scr.rpm and did a rpmbuild -ba --target=`uname -m` kernel-2.6.spec 2> prep-err.log | tee prep-out.log The build failed at the end: Processing files: kernel-xenU-devel-2.6.9-67.0.20.EL Checking