search for: bge

Hi. I got this on today's RELENG_6 with Broadcom BCM5722 A0, ASIC rev. 0xa200. >From dmesg (bge related): bge0: <Broadcom BCM5722 A0, ASIC rev. 0xa200> mem 0xe8400000-0xe840ffff irq 16 at device 0.0 on pci2 bge0: firmware handshake timed out, found 0x4b657654 bge0: firmware handshake timed out, found 0x4b657654 bge0: EEPROM read timed out bge0: failed to read EEPROM device_attach: bge0...

Hi, between March 16 and now, bge on a Sun X2200 stopped working, turning off msi (via hw..pci.enable_msi=0) got it working again. I tried first replacing bge with an older version but that did not help. please advice :-) Danny

...ed to the bugs database. I''m posting here in case one of the Crossbow developers might see it and confirm this behavior. Description Duplicate packets are generated whenever an aggregate is introduced into the network configuration. We''ve ruled out switch ports and physical bge interfaces as problematic. It only manifests when an aggregation datalink exists in the configuration, regardless of whether it aggregates multiple physical interfaces (e.g. bge0 and bge1) or a single physical interface (e.g. bge0). The duplicates are only generated by the OpenSolaris host. The...

Hello! I have Compaq DL360G2 with Broadcom BCM5701 Gigabit Ethernet and FreeBSD 5.1R installed. There are no problems if I use bge as usual network card, but when I try to use 802.1Q vlans, I can't receive (only receive, sending is ok) packets more then 1456 bytes! What is the problem? BGE driver, VLAN driver or my network configuration? Best wishes, Boris

How do I create a vnic that represents the factory assigned MAC address of my physical nic? The bge device in my system (x2100) appears to support 4 MAC addresses. The driver reserves the first as the ''primary/default'' address and allows manipulation of the other three via the MAC_CAPAB_MULTIADDRESS interface. I''d like to use vnics on this system, as I have Xen guest...

Hi, this server, a Dell R720 has 4 bge on board, Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000 bge0: APE FW version: NCSI v1.1.7.0 bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus0: <MII bus> on bge0 ... I have connected the ethernet to port labeled 0, but it appears as...

Recent SUP. Installed on Dell PowerEdge 4600. Getting tons of: Sep 30 12:23:16 zige /kernel: bge0: gigabit link up Sep 30 12:23:46 zige last message repeated 98 times Also getting some TCP retransmits. This causes noticable delays in pretty much everything I do now. Not a problem prior to the SUP. I was on 4.8-STABLE before. When pulling/replacing cables, it went into a mode where it woul...

Author: mabloom Repository: /hg/zfs-crypto/gate Revision: 39c5623029b347adbf2ab92400d25328f7b321ee Log message: 5084264 Error messages output when configure jumbo frames using bge.conf Files: update: usr/src/uts/common/io/pci_pci/pci_pci.c

...the built-in NIC. pciconf -lv on the new mini shows it as none3 at pci0:1:0:0: class=0x020000 card=0x168614e4 chip=0x168614e4 rev=0x01 hdr=0x00 vendor = 'Broadcom Corporation' class = network subclass = ethernet The previous edition mini (that works) reports bge0 at pci0:2:0:0: class=0x020000 card=0x16b414e4 chip=0x16b414e4 rev=0x10 hdr=0x00 vendor = 'Broadcom Corporation' device = 'NetXtreme BCM57765 Gigabit Ethernet PCIe' class = network subclass = ethernet Is there a chance that adding the new card/chip in...

...rcond (i32 (seteq GPRegs:$Rsrc1, GPRegs:$Rsrc2)), bb: $SImm16)], s_br>; Tablegen reports: BEQ: (brcond:void (setcc:i32 GPRegs:i32:$Rsrc1, GPRegs:i32:$Rsrc2, SETEQ:Other), (bb:Other):$SImm16) as soon as I add a register class that supports either [v2i32] or [v4i32] I get the following: BGE: (brcond:void (setcc:isInt GPRegs:i32:$Rsrc1, 0:i32, SETGE:Other), (bb:Other):$SImm16) build/llvm/trunk/Debug/bin/tblgen: In BGE: Could not infer all types in pattern! Thanks -- Christopher Lamb

...desktop, using 192.168.1.x and an fxp device, and it all works perfectly, but as soon as I do this on another machine on a public IP, I'm not getting any routing, I can't even ping it from the same machine ... My first thought was that there was an issue with IP aliases already on the bge device, but tried doing the following: ifconfig bridge0 destroy ifconfig tap0 destroy ifconfig fxp0 -alias 192.168.1.101 ifconfig fxp0 alias 192.168.1.101 netmask 255.255.255.255 ifconfig bridge0 create ifconfig tap0 create ifconfig bridge0 addm fxp0 addm tap0 up on my desktop here and then start...

...er in comparison to the connector layout and the linux tg3 driver. We seem to be detecting PCI0:2:0 before PCI0:1:0. This seems odd to me. When I replace the broadcom daughter card with an intel daughter card, this does not show up, so I assume either a malfunction of the Dell ACPI tables or the bge(4) driver. http://people.freebsd.org/~sbruno/dell_12g_pciconf.txt http://people.freebsd.org/~sbruno/r620_acpidump.txt

...-I. -I../../src/include -I../../src/include -I/usr/local/include -DHAVE_CONFIG_H -g -O2 -std=gnu99 -c plot3d.c -o plot3d.o /usr/ccs/bin/as: "/tmp/ccYv732b.s", line 7057: error: constant value must be between -4096 and 4095 make[3]: *** [plot3d.o] Error 1 make[3]: Leaving directory `/bge/penel/R-devel/src/main' make[2]: *** [R] Error 2 make[2]: Leaving directory `/bge/penel/R-devel/src/main' make[1]: *** [R] Error 1 make[1]: Leaving directory `/bge/penel/R-devel/src' make: *** [R] Error 1 I did not found any report about this problem in the R-devel archives . Should I...

...The behaviour is somewhat hard to diagnose, since there's no panic - just a hard lock. The 4.8-R machine: $ uname -a FreeBSD quadric.dsl.isometry.net 4.8-RELEASE FreeBSD 4.8-RELEASE #0: Sun Apr 6 19:46:37 UTC 2003 root@quadric.dsl.isometry.net:/usr/obj/usr/src/sys/QUADRIC i386 $ ifconfig bge0 bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=3<rxcsum,txcsum> inet 192.168.108.1 netmask 0xffffff00 broadcast 192.168.108.255 inet6 fe80::204:76ff:fe3b:6baf%bge0 prefixlen 64 scopeid 0x3 ether 00:04:76:3b:6b:af m...

...VER request, as it thinks the IP checksum is wrong, which tcpdump also confirms. Other DHCP clients are working fine on this network, so I do not believe it to be the network, server or dhcpd. Server is running a 2 Port Intel card - em driver. Client is a Dell PE1750 with 2 onboard NIC's - bge driver. I have tried turning off both RXCSUM and TXCSUM on both the client and server machines with no luck. I also tried the second NIC on the server with the same result. This setup was working just a couple of weeks ago, and the only thing that has changed is updating the src for a make wor...

...ip-type: exclusive net: address not specified physical: skge0 I''ve tried variations, such as plumb''ing skge0 in the globalzone, etc, but I''ve had no luck. Are IP Instances only valid with certain NIC''s (every example I''ve ever seen was bge) or am I missing something? Thanks. benr. This message posted from opensolaris.org

Dear All, I have a FreeBSD box running 5.4-RELEASE-p8. Two interfaces: fxp0 - internet, SKA4 internal interface fxp0: <Intel 82559 Pro/100 Ethernet> bge0 - internal with 30 vlans on it, old bge Gigabit 64/32 PCI-2.1 adapter. bge0: <Altima AC1002 Gigabit Ethernet, ASIC rev. 0x105> Firewall is pf with about 5000 rules. A week ago it was working just properly, but after adding more RAM (2GB additional RAM, and i do not thing that this is the...

...src2)), bb: > $SImm16)], s_br>; > > Tablegen reports: > BEQ: (brcond:void (setcc:i32 GPRegs:i32:$Rsrc1, GPRegs:i32:$Rsrc2, > SETEQ:Other), (bb:Other):$SImm16) > > as soon as I add a register class that supports either [v2i32] or > [v4i32] I get the following: > > BGE: (brcond:void (setcc:isInt GPRegs:i32:$Rsrc1, 0:i32, > SETGE:Other), (bb:Other):$SImm16) > build/llvm/trunk/Debug/bin/tblgen: In BGE: Could not infer all types > in pattern! Comparison nodes don't support vector types. -Chris -- http://nondot.org/sabre/ http://llvm.org/

I need to build up a few servers and routers, and am wondering how FreeBSD 9.1 is shaping up. Will it be likely to be more stable and robust than 9.0-RELEASE? Are there issues that will have to wait until 9.2-RELEASE to be fixed? Opinions welcome. --Brett Glass

Hi folks. This is probably a dumb question, but i''m not sure where to start. I have snv_80 running and booting into xVM with no problems. I am wondering if my hardware supports running Windows Vista in a virtual machine? I have a Dell Precision M6300 In particular, I''m wondering if my graphics card and wired/wireless NIC are going to work? Vid card: Nvidia Quadro M1600 wired