Displaying 20 results from an estimated 76 matches for "ad4".
Did you mean:
a4
1999 Jan 29
2
Installation of SAMBA 2.0 on Solaris 2.6
Hi people,
Is there somebody who knows how to install SAMBA 2.0 on Solaris 2.6?
Thanks,
Rivaldo
2006 Apr 11
0
Serial ATA Errors
...it but
we just upgraded the RAM on the server from 1 GB to 2 GB (DDR 400),
perhaps a cable got slightly loose. I'm pretty certain the hard drives are
good since the server ran fine prior to the memory upgrade.
What do the errors below mean? Should I be worried?
Apr 11 17:17:12 freebsd kernel: ad4: ata_command: addr=c000, command=c8,
lba=432167635, count=4, feature=0
Apr 11 17:17:12 freebsd kernel: ad4: ata_command: addr=c000, command=ca,
lba=13040031, count=32, feature=0
Apr 11 17:17:12 freebsd kernel: ad4: ata_command: addr=c000, command=ca,
lba=17221247, count=32, feature=0
Apr 11 17:17:1...
2006 Mar 24
1
ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - on FreeBSD 6-STABLE
...SETFEATURES SET TRANSFER MODE timeout
on (msgid 441AA807.5090100@wfeet.za.net , 17 March 14:18 GMT + 2 on
freebsd-stable), I installed FreeBSD 6.1 BETA 4 and upgraded to a
6-STABLE kernel, running the box in 'safe' mode to do so. I now,
however, get a slightly different error message:
ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout -
completing request directly
ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout -
completing request directly
ad4: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing
request directly
ad4: WARNING - SETFEATURE...
2008 Apr 25
1
replace-in-place: cannot replace, device is busy
Say I have a raidz of 3 disks: ad4 ad6 ad8
I want to tell zfs that I am pulling ad4 and replacing it with a new disk on the same controller, but I can''t get it to release its hold on ad4.
[0138][root at ztest:/home/matt]# zpool offline pond ad4
Bringing device ad4 offline
[0140][root at ztest:/home/matt]# zpool replace po...
2008 Jun 26
1
gmirror+gjournal: unable to boot after crash
...RELEASE #p2 amd64 (built from latest CVS source), the box hung a couple of times when on high disk load. Finally, while building some port it won't boot for no reason obvious to me.
This is what I get with kernel.geom.mirror.debug=2:
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 476940MB <SAMSUNG HD501LJ CR100-13> at ata2-master SATA300
ad4: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: nVidia check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
GEOM_MIRROR[2]: Tasting ad4.
ad4: LSI (v2) check1 failed...
2003 Dec 30
0
RE: +AFs-Asterisk-Users+AF0- Multi-line, multi-registration phones
...----Original Message-----
From: Steven Critchfield +AFs-mailto:critch+AEA-basesys.com+AF0-
Sent: Tuesday, December 30, 2003 1:19 PM
To: asterisk-users+AEA-lists.digium.com
Subject: Re: +AFs-Asterisk-Users+AF0- Multi-line, multi-registration phones
On Tue, 2003-12-30 at 14:29, Sean Garland wrote:
+AD4- I have hard phones that are capable of handling three calls at once.
+AD4- That is setup (apparently) through multiple registrations. My
+AD4- question is has anyone done this and what is the proper way of doing
+AD4- it? Do I have to setup (for 2 phones that have three lines) 6
+AD4- sectio...
2003 Dec 30
0
Re: +AFs-Asterisk-Users+AF0- RE: +AFs-Asterisk-Users+AF0- Multi-line, multi-registration phones
...box.
etc...
So you see you can save a great amount of time with macros and after you get the
hang of them they will cut down on your extensions.conf file size and make your
life a lot easier.
Robert Mann
----- Original Message -----
From: +ACI-Sean Garland+ACI- +ADw-sean+AEA-siskiyoutech.com+AD4-
To: +ADw-asterisk-users+AEA-lists.digium.com+AD4-
Sent: Tuesday, December 30, 2003 3:00 PM
Subject: +AFs-Asterisk-Users+AF0- RE: +AFs-Asterisk-Users+AF0- Multi-line, multi-registration
phones
Okay, so like this?
PHONE1+AD0-SIP/2000
PHONE2+AD0-SIP/3000
PHONE3+AD0-SIP/4000
ALL+AD0AJAB7-PHONE1+AH0...
2008 Oct 23
2
Promise SX4060 on 7.1-BETA2
...stall 7.1-BETA2 (from CD) onto a PC with a Promise
SX4060 RAID controller and two Seagate 120GB ATA disk drives.
The boot from CD keeps repeating the following (error) messages: (I'm
retyping here)
============================================================================
==================
ad4: WARNING - SETFEATURES SET TRANSFER MODE task queue timeout - completing
request directly
ad4: WARNING - SETFEATURES ENABLE RCACHE task queue timeout - completing
request directly
ad4: WARNING - SETFEATURES ENABLE WCACHE task queue timeout - completing
request directly
ad4: WARNING - SET_MULTI task...
2009 Mar 27
1
can't add samba to the domain
Hello,all
I can't add samba to the domain with the command net join, the
error is like this:
net join -U usrname -S *****
Enter usrname's password:
[2009/03/26 11:03:55, 0]
utils/net_rpc_join.c:net_rpc_join_newstyle(393)
Error in domain join verification (credential setup failed):
NT_STATUS_INVALID_COMPUTER_NAME
Unable to join domain **.
I can ping the domain server and
2010 Nov 11
1
troule switching winbind to use a new AD 2008
...311 2 2 30
---Second:---
The working AD shows this:
got principal=ad1$@MS.MYDOMAIN.COM
The non-working AD shows this:
got principal=not_defined_in_RFC4178 at please_ignore
cli_session_setup_spnego: got a bad server principal, trying to
guess ...
cli_session_setup_spnego: guessed server principal=AD4$@MS.MYDOMAIN.COM
---Third:---
The working AD shows this:
got principal=ad1$@MS.MYDOMAIN.COM
Doing kerberos session setup
ads_cleanup_expired_creds: Ticket in ccache[MEMORY:cliconnect] expiration Thu, 11 Nov 2010 06:53:02 PST
rpc_pipe_bind: Remote machine ad1.ms.mydomain.com pipe \lsarpc fnum 0x400...
2003 May 08
2
Can't boot from ad4: Device Not Configured?
...rives from
the slow built-in IDE controller to
a faster PCI card (Promise ULTRA TX2).
The boot loader succesfully loads the
kernel, and the kernel succesfully probes
the Promise controller and the hard
disk connected to it.
But the root mount fails with error 6,
even after I type in "ufs:/dev/ad4s1a"
I looked through the kernel config files
and LINT and could find nothing that
seemed relevant.
Any advice gratefully appreciated.
Tim Kientzle
2008 Jul 09
2
disk questions: geom and zfs
...I have a 7-stable:
[matheus@xxx /usr/home/matheus]$ uname -a
FreeBSD xxx 7.0-STABLE FreeBSD 7.0-STABLE #2: Sun Jul 6 15:03:26 BRT 2008
root@lamneth:/usr/obj/usr/src/sys/xxx_7 i386
and there exists three geom things.
gconcat status
Name Status Components
concat/concat0 UP ad4
ad5
gmirror status
Name Status Components
mirror/mirror0 COMPLETE ad8s1
ad10s1
gstripe status
Name Status Components
stripe/stripe0 UP ad8s2
ad10s2
and a small (100GB) zfs pool.
the thing i...
2008 Oct 19
9
My 500-gig ZFS is gone: insufficient replicas, corrupted data
...ool to continue
functioning.
action: Destroy and re-create the pool from a backup source.
see: http://www.sun.com/msg/ZFS-8000-5E
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
tank UNAVAIL 0 0 0 insufficient replicas
ad4 UNAVAIL 0 0 0 corrupted data
# zdb -l /dev/ad4
--------------------------------------------
LABEL 0
--------------------------------------------
version=6
name=''tank''
state=0
txg=4
pool_guid=12069359268725642778
hostid=2719189110
hos...
2006 Mar 01
1
New 'amr' driver and linux MegaMGR
Hi,
according to http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/amr/amr.c?only_with_tag=RELENG_6
it seems MegaMGR for linux now can work. Any experience?
--
Cris, member of G.U.F.I
Italian FreeBSD User Group
http://www.gufi.org/
2008 Aug 02
3
7-STABLE, gjournal and fsck.
...d gjournal on existing filesystems (all UFS). And
then it happened - my system had a power failure. After boot, it
forced me to run fsck manualy. Nothing special, I did it before... But
this time it failed on gjournaled disks.
So, when I was dropped to the single-user shell, I tried:
fsck /dev/ad4s1g.journal
It said:
CANNOT READ BLK: xxxx
CONTINUE? [yn]
I typed 'y' and nothing happened. Here is the log:
-8<-
Aug 2 19:13:43 matrix kernel: GEOM_JOURNAL: Journal 4059706613:
ad4s1g contains data.
Aug 2 19:13:43 matrix kernel: GEOM_JOURNAL: Journal 4059706613:
ad4s1g contains...
2006 Mar 17
3
SETFEATURES SET TRANSFER MODE semaphore timeout on FreeBSD 6.0 RELEASE
Hi
I have a newly installed FreeBSD 6.0 release machine on which I am
getting the following error on the console:
"ad4: req=0xc23bc258 SETFEATURES SET TRANSFER MODE semaphore timeout !!
DANGER Will Robinson !!"
This is generally associated with heightened disk activity, but it
happens inevitably after a while (minutes or hours) if the machine is
running.
The atacontrol list shows:
ATA channel 0:
Master...
2006 Mar 10
0
Strange problem with STATUS of Intel MatrixRAID
...ail kernel: ad8: detached
Mar 8 20:03:11 mail kernel: unknown: TIMEOUT - WRITE_DMA48 retrying (1
retry left) LBA=326028767
Mar 8 20:04:39 mail syslogd: kernel boot file is /boot/kernel/kernel Mar
8 20:04:39 mail kernel: Copyright (c) 1992-2005 The FreeBSD Project.
Mar 8 20:04:39 mail kernel: ad4: 238475MB <WDC WD2500SD-01KCC0 08.02D08> at
ata2-master SATA150
Mar 8 20:04:39 mail kernel: ad4: Intel calc=f72ede8c meta=7b976f46
Mar 8 20:04:39 mail kernel: ad6: 238475MB <WDC WD2500SD-01KCC0 08.02D08>
at ata3-master SATA150
Mar 8 20:04:39 mail kernel: ad6: Intel calc=f72ede8c m...
2003 Jul 09
3
[SAGE] FreeBSD 4.4-REL to FreeBSD 4.8-STABLE upgrade problem.
.../mergemaster.sh -p
# make buildworld
# make buildkernel
# make installkernel
# cd /etc
# mv MAKEDEV MAKEDEV.old
# cp /usr/src/etc/MAKEDEV .
# sh MAKEDEV all
# reboot
Upon reboot I get my favorite lines:
blah, blah
blah, blah
ar0: ... <ATA RAID1 array> [...] status: READY subdisks:
0 READY ad4: ... at ata2-master UDMA100
1 READY ad6: ... at ata3-master UDMA100
acd0: CDROM ... at ata0-master PIO4
Mounting root from ufs:/dev/ad4s1a
Root mount failed: 16
Manual root filesystem specification:
blah, blah
Okay, so I reboot, but this time I load kernel.good and the system comes up
fine wit...
2008 Aug 20
1
boot0cfg and gmirror ...
Hi, all,
I know about the "foot shooting" prevention in geom(4)
when trying to update the MBR of a mounted disk.
I have a system with ad4 and ad6 mirrored and fdisk
partitions residing on the mirror to be booted alterningly:
hd30# gmirror status
Name Status Components
mirror/m0 COMPLETE ad4
ad6
hd30# mount
/dev/mirror/m0s1a on / (ufs, local, read-only)
devfs on /dev (devfs, local)
/dev/mirror/m0s3a o...
2003 Jul 07
2
FreeBSD 4.4-REL to FreeBSD 4.8-STABLE upgrade problem.
...s hosting that service
anyway?
And now for the question..
I have a test server that is being used to test a 4.4-REL to 4.8-STABLE
upgrade, and I've found the system will no longer boot unless I load a
saved 4.4-REL kernel. The error I get is along the lines of:
Mounting root from ufs:/dev/ad4s1a
Root mount failed: 16
At first I got this error using a custom kernel configuration known as WWW,
but after getting this error I built a new kernel based on GENERIC:
# cd /usr/src
# make update
# make buildkernel
# make installkernel
# reboot
Per /usr/src/UPDATING there was a change in the A...