search for: 3081e

...f beloved " Log info 31080000 received for target" messages, and just generally not working right. (SM 836EL1 and 836TQ chassis - though I have several variations on theme depending on date of purchase: 836EL2s, 846s and 847s - sol10u8, 1.26/1.29/1.30 LSI firmware on LSI retail 3801 and 3081E controllers. Not that it works any better on the brace of 9211-8is I also tried these drives on.) Before signing up for the list, I "accidentally" bought a wad of caviar black 2TBs. No, they are new enough to not respond to WDTLER.EXE, and yes, they are generally unhappy with my boxen....

...'m having a ZFS issue when a disk is failing. The system is a supermicro motherboard X8DTH-6F in a 4U chassis (SC847E1-R1400LPB) and an external SAS2 JBOD (SC847E16-RJBOD1). It makes a system with a total of 4 backplanes (2x SAS + 2x SAS2) each of them connected to a 4 different HBA (2x LSI 3081E-R (1068 chip) + 2x LSI SAS9200-8e (2008 chip)). This system is has a total of 81 disk (2x SAS (SEAGATE ST3146356SS) + 34 SATA3 (Hitachi HDS722020ALA330) + 45 SATA6 (Hitachi HDS723020BLA642)) The system is controlled by Opensolaris (snv_134) and it work normally. All the SATA disks are part of t...

Hi, folks, Got an older Dell R410, with an LSI 1068E PCI-Express Fusion-MPT SAS (rev 08). It *appears* that a) trying MegaRaid, and b) from what I'm googling, that what I need are mptfusion-related packages. Unfortunately, yum shows me nothing available in base, epel, or rpmfusion. Am I looking for the wrong thing, or does anyone have a source (no, I haven't looked at LSI, sorry

...). I believe the 1068E was used on > the SAS3081/3082 cards Ahhh! Thanks, that's a useful bit of info. > > thats an older SAS1 card, and has 2TB disk limits, I believe, which > can't readily be circumvented. > > Confusing, but to flash these, you need to get the > SAS3081ER_Package_P21_IR_IT_Firmware_BIOS_for_MSDOS_Windows, unzip it, > and locate the firmware and BIOS files for IT mode, then get the > flash2sas utility for Linux to actually flash the files. or flash it > using MSDOS (freedos on a usb stick) or using EFI shell (if your system > is so endo...

...SAS drives, and you can use linux native mdraid on it (and/or LVM or whatever). I believe the 1068E was used on the SAS3081/3082 cards thats an older SAS1 card, and has 2TB disk limits, I believe, which can't readily be circumvented. Confusing, but to flash these, you need to get the SAS3081ER_Package_P21_IR_IT_Firmware_BIOS_for_MSDOS_Windows, unzip it, and locate the firmware and BIOS files for IT mode, then get the flash2sas utility for Linux to actually flash the files. or flash it using MSDOS (freedos on a usb stick) or using EFI shell (if your system is so endowed). to find t...

Hello I am running opensuse 11 on a Sun x4150 32GB RAM 2 quad x86_64 E5450''s. It has a SAS PCI-Express LSI 3081E Host Bus Adapter (a rebranded Adaptec RAID 5805 it seems) running in a RAID 5 config. Xen in this setup is 3.2.1. The kernel is 2.6.25.18 The problem I have is that when I try to run a the xen kernel the RAID device is not found . I get messages on the console of "can''t find /dev/di...

Greetings all- I need to purchase a PCIe SATA or SAS controller(non-raid) for a Supermicro 2U system. It should be directly bootable. Any recommendations? The system will be running CentOS 5.4 as an LTSP system. Thanks! --Tim

During the diagnostics of my SAN failure last week we thought we had seen a backplane failure due to high error counts with ''lsiutil''. However, even with a new backplane and ruling out failed cards (MPXIO or singular) or bad cables I''m still seeing my error count with LSIUTIL increment. I''ve got no disks attached to the array right now so I''ve also