I have two adsl lines on my linux firewall box and i want to do
some load balance between them...i tried a lot of different
things, but it isnīt working...Following the instructions of
http://lartc.org/howto/lartc.rpdb.multiple-links.html i used the
configuration above. using "iptraf" I can see some few packets
using the ppp1 connection, but almost all the packets use
ppp0 connection. Iīm doing something wrong? Iīm forgetting
something? Maybe my kernel doesnīt support multipath? how
can i check it?
I use Mandrake 10 (kernel 2.6)
2 adsl connections with 600 KB down and 300 KB up (ppp0 and
ppp1)
I have the impression that the dynamic route change isnīt
working ... cause if i manually change the default route
between ppp0 and ppp1 all the traffic that was going through
ppp0 still use it, and the new traffic go through ppp1... some
advice?
Tks in advance and sorry my very poor english!

ip route add 200.138.225.0/24 dev ppp0 src 200.215.125.195
table 10
ip route add default via 200.138.225.254 table 10
ip route add 201.3.196.0/24 dev ppp1 src 201.3.232.205
table 11
ip route add default via 201.3.196.254 table 11

ip route add 200.138.225.0/24 dev ppp0 src 200.215.125.195
ip route add 201.3.196.0/24 dev ppp1 src 201.3.219.25

ip route add default via 200.138.225.254

ip rule add from 200.215.125.195 table 10
ip rule add from 201.3.232.205 table 11

ip route add default scope global nexthop via
200.138.225.254 dev ppp0 weight 1 nexthop via
201.3.196.254 dev ppp1 weight 1

 P.S.: I tried to send this message using another email
account. I think that that email wasnīt sent... if it was: sorry
for resposting... but please answer again.. cause i didnīt saw
any response...