Any idea? ----- Original Message ----- From: "XMundo - Soporte Tecnico" <soporte@xmundo.net> To: <lartc@mailman.ds9a.nl> Sent: Sunday, July 25, 2004 10:35 PM Subject: [LARTC] Load Balancing Hi. Iīm making an script for load balancing of two cablemodems internet connections toward my LAN. The problem is that when I try to 'equalize' the the two internet connections with the weight=1 it doesnīt work. On the other hand, if I put 5 and 5 it works, but not at 100%, it does intermittlently, some times works and others donīt. example: ip route add default equalize\ nexthop via $P1 dev $IF1 weight 5\ nexthop via $P2 dev $IF2 weight 5 Besides, when I open, for example, the firefox browser, it takes a lot to start navigating, sometimes it works and other times gives an error and I canīt navigate. >From the server it works properly, but form the clients PCs doesnīt. By the way, Iīm making NAT toward the Client PCs. Do you have any idea why does it take so long to start navigating and why sometimes it works and sometimes doesnīt. This is the current script running in my server: #================================================= P0_NET=10.0.1.0/24 IF0=eth1 IP0=10.0.1.1 IF1=eth0 IP1=xxx.xxx.xxx.7 P1_NET=xxx.xxx.xxx.0/24 P1=xxx.xxx.xxx.1 IF2=eth2 IP2=yyy.yyy.yyy.21 P2_NET=yyy.yyy.yyy.0/24 P2=yyy.yyy.yyy.1 echo 0 > /proc/sys/net/ipv4/conf/eth0/rp_filter echo 0 > /proc/sys/net/ipv4/conf/eth2/rp_filter echo 3 > /proc/sys/net/ipv4/route/gc_elasticity echo 1 > /proc/sys/net/ipv4/route/gc_interval echo 0 > /proc/sys/net/ipv4/route/gc_timeout ip route flush cache ip route flush all ip route flush table modem0 ip route flush table modem1 ip rule add from $IP1 lookup modem0 ip rule add from $IP2 lookup modem1 ip route add $P1_NET dev $IF1 src $IP1 ip route add $P2_NET dev $IF2 src $IP2 ip route add $P0_NET dev $IF0 src $IP0 ip rule add from $P1_NET lookup modem0 ip route add $P0_NET dev $IF0 table modem0 ip route add 0/0 via $P1 table modem0 ip rule add from $P2_NET lookup modem1 ip route add $P0_NET dev $IF0 table modem1 ip route add 0/0 via $P2 table modem1 ip route add default equalize\ nexthop via $P1 dev $IF1 weight 5\ nexthop via $P2 dev $IF2 weight 5 #================================================= _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/