hello! i have the following problem: i have a pc, which has one (eth0) NIC. eth0 is connected to two other linux machines acting as routers to the internet. i want to classify packets outgoing from my PC. i want to mark packets that are routed through 1. router with mark 1 and the others packets routed throuhg router 2. with mark 2. i had following ideas: -using destination MAC -using route realms (but routes are generated using quagga and it does not support realms) -using 2 NICs, (but i can't use 2 NICs) thanks Matis ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
VLAN? cvok@bonet.sk wrote: > hello! > > i have the following problem: > > i have a pc, which has one (eth0) NIC. eth0 is connected to two other linux > machines acting as routers to the internet. > i want to classify packets outgoing from my PC. i want to mark packets that are > routed through 1. router with mark 1 and the others packets routed throuhg > router 2. with mark 2. > > i had following ideas: > -using destination MAC > -using route realms (but routes are generated using quagga and it does not > support realms) > -using 2 NICs, (but i can't use 2 NICs) > > thanks > > Matis > > ---------------------------------------------------------------- > This message was sent using IMP, the Internet Messaging Program. > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/