I want to shape the traffic on the http port and further on shape it if the
destination ip is on some network I specify

however, only the first rule is applied ... why ?

#http
$filtru prio 1 u32 match ip sport 80 0xffff flowid 1:11
#droop :-)
$filtru prio 1 u32 match ip src x.x.x.x  \
                match ip dst x.x.x.0/24 flowid 1:13

where classes are defined earlier as

$tc class add dev eth0 parent 1:1 classid 1:10 \
                htb rate 32kbit ceil 32kbit

$tc class add dev eth0 parent 1:1 classid 1:11 \
                htb rate 64kbit ceil 64kbit

$tc class add dev eth0 parent 1:1 classid 1:12 \
                htb rate 128kbit ceil 160kbit

$tc class add dev eth0 parent 1:1 classid 1:13 \
                htb rate 100kbit ceil 100kbit

and

filtru="$tc filter add dev eth0 protocol ip \
                parent 1:0"


thanks in advance,

petre



--
  6:39pm  up  6:21,  1 user,  load average: 0.06, 0.10, 0.06

On Tuesday 13 August 2002 17:41, Petre Bandac wrote:
> I want to shape the traffic on the http port and further on shape it if=
 the
> destination ip is on some network I specify
>
> however, only the first rule is applied ... why ?
Because you add both rules to the same parent.  When one rule is matched,=
 the=20
packet is put in the destination class and the other rule is never matche=
d. =20
Atach the second rule to class 1:11 with option "parent 1:11" and it
shou=
ld=20
work.

Stef

> #http
> $filtru prio 1 u32 match ip sport 80 0xffff flowid 1:11
> #droop :-)
> $filtru prio 1 u32 match ip src x.x.x.x  \
>                 match ip dst x.x.x.0/24 flowid 1:13
>
> where classes are defined earlier as
>
> $tc class add dev eth0 parent 1:1 classid 1:10 \
>                 htb rate 32kbit ceil 32kbit
>
> $tc class add dev eth0 parent 1:1 classid 1:11 \
>                 htb rate 64kbit ceil 64kbit
>
> $tc class add dev eth0 parent 1:1 classid 1:12 \
>                 htb rate 128kbit ceil 160kbit
>
> $tc class add dev eth0 parent 1:1 classid 1:13 \
>                 htb rate 100kbit ceil 100kbit
>
> and
>
> filtru=3D"$tc filter add dev eth0 protocol ip \
>                 parent 1:0"
>
>
> thanks in advance,
>
> petre

--=20

stef.coene@docum.org
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net